Automated Forming and Hot Pressing System
The BESURE TSMP-11075 is a fully automatic industrial packaging production machine integrating forming, hot pressing, dehydration, mold transfer, and product handling within a single production system.
Driven by servo motors and precision reducers, the machine is designed to support consistent automated production for molded packaging products used across industries such as electronics, cosmetics, jewelry, and other applications requiring customized packaging shapes and dimensions.
Fully Automatic Production Process
The TSMP-11075 uses an automated slurry forming and transfer process.
The slurry suction mold rotates 180° to align parallel with the slurry surface before descending into the material. After absorbing the slurry and completing the initial forming process, the mold rises above the slurry and rotates back to the horizontal position for dehydration.
The forming mold then works with the transfer mold during the closing process. Vacuum adsorption and air blowing are used to transfer the molded product, creating a continuous automated workflow from forming to product transfer.
Servo-Driven Hot Pressing
The hot pressing system uses servo control and provides a maximum pressing force of 30 tons.
The main drive systems include:
The combination of servo-driven operation and automated forming helps maintain stable production performance while reducing the need for extensive manual intervention.
Main Machine Specifications
| Specification |
Details |
| Model |
TSMP-11075 |
| Machine Dimensions |
L5300 × W3200 × H3900 mm |
| Template Size |
1100 × 750 mm |
| Maximum Hot Pressing Pressure |
30T, Servo |
| Forming Motor |
7 kW |
| Translation Motor |
5 kW |
| Hot Pressing Motor |
7 kW |
| Heating Installed Power |
122.4 kW / 140,000 kcal |
| Total Power |
141.4 kW / 38 kW |
| Applicable Product Height |
<130 mm |
| Applicable Product Thickness |
<1.2 mm |
| Molding Efficiency |
≥35 seconds/mold, depending on product |
Flexible Packaging Production
The production system can be configured for packaging products with different shapes, sizes, and structural requirements.
The applicable product range supports a maximum product height below 130 mm and thickness below 1.2 mm. Actual molding cycle time depends on the specific product design and production conditions.
This flexibility makes the equipment suitable for manufacturers producing customized molded packaging for different markets and product categories.
Production Capacity Options
BESURE also provides different production configurations to accommodate varying output requirements.
| Model |
Daily Output |
Recommended Floor Area |
Personnel |
Electricity |
Water |
| IP4000 |
4 Tons/Day |
50 × 12 m, Height ≥4 m |
4–7 persons/shift |
100–150 kW/hour |
0.5–1 m³/hour |
| IP5000 |
5 Tons/Day |
60 × 12 m, Height ≥4 m |
5–7 persons/shift |
150–190 kW/hour |
0.6–1.5 m³/hour |
| IP6000 |
6 Tons/Day |
65 × 12 m, Height ≥4.5 m |
6–8 persons/shift |
160–210 kW/hour |
0.75–1.5 m³/hour |
Packaging Production for Different Industries
The equipment is designed to support industrial packaging production across a range of applications. Its flexible forming capability allows manufacturers to develop packaging solutions according to different product dimensions and structural requirements.
Typical application areas include:
Integrated Production and Technical Support
A fully automated production line can help manufacturers reduce manual operations while maintaining a more consistent production workflow. BESURE can also provide customized production solutions, technical assistance, and operator training to support equipment installation and operation.
For manufacturers looking to expand molded packaging production, the BESURE TSMP-11075 combines automated forming and hot pressing in an integrated production system.
Reviews
There are no reviews yet.